Table of Contents
Advertisement
Security Escort
Figure 4.16: Backup Dialog
When the Backup menu item is chosen, options are presented to save the databases to the
master or slave computer's hard drive. Verify that the backup destination is available before
clicking the [Backup] button. To abort the process, click the [Cancel] button in the dialog.
Only the databases with a checkmark will be backed up. Typically all databases should be
backed up at once. As insurance against database problems, multiple backups to different
disks should be made frequently. At least one backup copy should be stored in a different
location from this system (remember to keep this copy current).
Operators
Subscriber
Transponders
Reports
Master Database drive
Slave Database drive
Local Escort drive
Other Backup drive
[Backup]
Bosch Security Systems B.V.
This is the database of all of the individuals with passwords to
operate the system software and acknowledge alarms.
This database contains all of transmitters assigned in the system.
This database contains the configuration of the transponders,
receivers, virtual receivers and alert units.
This database contains all of the alarm reports and related alarm
map screens.
Store the backup files in the Security Escort Master Database path.
See the System Directories and Network Address dialog.
Store the backup files in the Security Escort Slave Database path.
See the System Directories and Network Address dialog.
Store the backup files in the save sub-directory as the Security
Escort System components are stored on this computer (typically
C:\ESCORT).
Store the backup files in the Other Backup/Restore path assigned
in the System Directories and Network Address dialog. This path
may be a local path, external drive or a network disk drive.
When the [Backup] button is clicked, all databases selected with a
checkmark will be saved to the destination selected on the right.
Technical Reference Manual
System menus and screens | en
2019.08 | V2.18.1.6 | DOC
37
Advertisement
Table of Contents
