60
en | System menus and screens
Figure 4.31: Current Check-in Status Dialog
[Print Report]
[Acknowledge]
4.2.14
Clear screen
To clear the screen of any outdated or unwanted data, choose this feature from the Utilities
menu. The screen automatically resets to its normal operations mode.
4.2.15
Output verification
When selected, the system is scanned to verify that all alarm outputs are in the correct state.
Any output found in the wrong state is corrected.
4.2.16
Synchronize system time
Selecting this option on the master computer causes the time on the slave and all of the
workstation computers to be updated to the master computer's time.
4.3
Setup menu
2019.08 | V2.18.1.6 | DOC
Clicking this button prints the displayed data to the report printer.
Clicking this button closes the dialog if it was selected from the menu.
However, if the dialog appeared automatically at the end of the check-in
period because some subscribers failed to check-in, you must enter your
password to acknowledge the dialog and remove it from this computer's
(and all other computer workstations) screens.
Technical Reference Manual
Security Escort
Bosch Security Systems B.V.