Table of Contents
Advertisement
Security Escort
Daily test report
Low battery report
Not testing report
Receivers not heard from
report
Daily trouble report
Guard tour report
Guard tour exception report The guard tour exception reports collected within the last day.
New alarm reports
Fail to test letters
Weekly subscriber test
report
Weekly security test report Report of security personnel testing for the last 7 days broken
Weekly watchman test
report
Weekly maintenance test
report
Subscriber Check-in report Report of all subscribers that failed to check-in during the last
Supervision Location report Report of all supervision enabled subscribers and their last
[Print]
[Export]
Bosch Security Systems B.V.
Report of testing by classes of subscriber for the last 24 hours
broken down by hour.
Report of all subscriber transmitters currently reporting low
battery.
Report of all subscriber transmitters that have not tested their
transmitters within the last 28 days.
Report of all receivers that have not heard transmissions
recently. This could indicate a problem with the receiver's ability
to hear alarms and test transmissions.
Report of all the troubles currently being reported by
transponders, receivers and alert units.
Report of the guard tours collected within the last day. This
selection does not generate a printed report. However, the
Midnight report and Sunday only checkboxes must be checked
to write a file of the guard tour information. Another application
like Microsoft Excel can sort and print the desired reports.
Not currently implemented.
Alarm reports for all of the new alarms that have been received
by the system.
Notices to all of the subscribers that have not tested within the
last 28 days. Not currently implemented.
Report of subscriber testing for the last 7 days broken down by
hour.
down by hour.
Report of watchman personnel testing for the last 7 days broken
down by hour.
Report of maintenance testing for the last 7 days broken down
by hour.
scheduled check-in period.
known location.
The [Print] button is only enabled if the printer is enabled from
the Printer > Select report printer dialog box. Clicking this
button prints all reports that are checked in the left-hand check
boxes.
The [Export] button is enabled if only the Not testing report is
selected. Other reports must not be selected. Clicking this
button exports the Not testing report in a ".csv" file format.
Technical Reference Manual
System menus and screens | en
2019.08 | V2.18.1.6 | DOC
47
Advertisement
Table of Contents
