Table of Contents
Advertisement
Security Escort
Most of the options given are simple checkboxes. To activate or deactivate the option given,
click on the checkbox adjacent to the text. A check mark appears in the checkbox adjacent to
activated option, empty checkboxes signify deactivated options. Some options in the Security
Preferences dialog require numerical values. To change the current values, click the text box
containing the values, then type in a new value.
Clicking the [Save] button saves the modifications and exits the Security Preferences dialog.
Click the [Cancel] button to save the changes made so far, to discard the changes, or to
remain in the Security Preferences dialog.
Turn on outside sounders
Turn on alarm strobes
Display unauthorized alarms This checkbox determines if "unauthorized" alarms are to be
Sound unauthorized alarms This checkbox determines if "unauthorized" alarms are to be
Filter virtual fence
No point text if area text
Output includes subscriber
ID
Output includes transmitter
ID
Bosch Security Systems B.V.
This checkbox is used to activate or deactivate the sirens on
alert units and transponders. Some security directors prefer that
all alarms be silent, others choose to employ sirens. Checking
this option causes the sirens on the alert units, to sound in the
event of an alarm. Temporarily deactivating the sounders may be
necessary during maintenance.
Checking this option causes the strobe lights on the alert units
and transponders, to flash in the event of an alarm.
displayed on the Central Console. Unauthorized alarms are those
triggered by transmitters not currently registered in the
Subscriber Database. These could be transmitters that have
been removed from the database because they were lost or
stolen, they could be transmitters not yet issued, or they could
be transmitters issued to subscribers at another Security Escort
System. Typically this checkbox should not be checked.
sounded on the horns of the receivers and the sirens of the alert
units and transponders. The option is not available unless the
Display unauthorized alarms option is selected. Typically this
checkbox should not be checked.
If the virtual fence option is be used, this box may be checked if
some false alarms are generated to reduce the number of the
false alarms. If it is checked then the actual alarms will be
delayed by the supervision period of the transmitter.
This checkbox affects the location text shown on the alarm
screen. If this checkbox is checked and the alarm is determined
to be within a predefined area then only the area text will be
displayed (any receiver location text will be suppressed).
Typically this checkbox should be checked.
If this checkbox is checked, then any time the system prints or
displays text for an alarm or test the subscriber's ID number will
also be displayed. Otherwise the subscriber's ID will not be
shown.
If this checkbox is checked, then any time the system prints or
displays text for an alarm or test the transmitter ID number will
also be displayed. Otherwise the transmitter ID will not be
shown. Typically this checkbox would not be checked.
Technical Reference Manual
System menus and screens | en
2019.08 | V2.18.1.6 | DOC
41
Advertisement
Table of Contents
