Exporting The Transponder Database - Bosch Security Escort SE2000 Series Technical Reference Manual

Security Escort
Attributes
PagerGroupA
BitmapNumber
LocationText
MatrixSwitchText
<ProtectedAreaPoints> element
Attributes
ProtectedXArea1
ProtectedYArea1
ProtectedXArea2
ProtectedYArea2
ProtectedXArea3
ProtectedYArea3
ProtectedXArea19
ProtectedYArea19
7.2.3

Exporting the Transponder Database

This section describes the information required to export data from the Transponder
Database.
Only users or operators who are assigned the minimum security level of "Install" is able to
view the Transponder Database. Go to menu File > Transponder Database dialog, and click
the [Export] button.
Bosch Security Systems B.V.
Value
(Floor 89), 98 (Floor 90), 99 (Floor 91), 100 (Floor 92), 101
(Floor 93), 102 (Floor 94), 103 (Floor 95), 104 (Floor 96), 105
(Floor 97), 106 (Floor 98), 107 (Floor 99).
Pager group. Default value is 0.
Graphic map of the area. 0-99. This field should contain only
numeric ASCII characters.
Location of the point. This field may be up to 100 characters. This
field may contain any printable ASCII character except the '?'.
ASCII value to control video matrix switch.
Value
st
1 coordinate point X of the area. This field should contain only
numeric ASCII characters.
1 st coordinate point Y of the area. This field should contain only
numeric ASCII characters.
2 nd coordinate point X of the area. This field should contain only
numeric ASCII characters.
2 nd coordinate point Y of the area. This field should contain only
numeric ASCII characters.
3 rd coordinate point X of the area. This field should contain only
numeric ASCII characters.
rd
3 coordinate point Y of the area. This field should contain only
numeric ASCII characters.
.
.
.
19 th coordinate point X of the area. This field should contain only
numeric ASCII characters.
th
19 coordinate point Y of the area. This field should contain only
numeric ASCII characters.
Technical Reference Manual
Maintenance | en 149
2019.08 | V2.18.1.6 | DOC