Table of Contents
Advertisement
Security Escort
Figure 4.38: Transponder Current Status Screen
Transponder
Total Alarms Received
Total Tests Received
Total Troubles Processed
Total Troubles Shed
Successful Incoming
Messages
Bosch Security Systems B.V.
Selects the transponder you want to see the status of.
The total number of alarm messages received by the Central
Console from this transponder since the data was last reset
(using the [Reset Transponder Troubles] button).
The total number of test messages received by the Central
Console from this transponder since the data was last reset
(using the [Reset Transponder Troubles] button).
The total number of trouble messages received by the Central
Console from the transponder and processed (see Total
Troubles Shed) since the data was last reset (using the [Reset
Transponder Troubles] button).
During certain rare occurrences, the communication traffic on
the transponder links becomes excessive and threatens to
increase the system response time to tests and alarms. This can
happen if faults are reported at a very high rate. To avoid slow
response in such situations, the Central Console may go into a
load shedding mode in which it ceases to record and display
Trouble Reports until the communications traffic subsides. The
Total Troubles Shed box indicates the number of trouble
messages that were not processed since the last reset (using
[Reset Transponder Troubles] button).
The total number of messages successfully received from this
transponder.
Technical Reference Manual
System menus and screens | en
2019.08 | V2.18.1.6 | DOC
75
Advertisement
Table of Contents
