Bosch Security Escort SE2000 Series Technical Reference Manual page 123

Security Escort
The Pager ID is required for all individual pagers dial-up and local. If the Phone number and
Pager password are assigned, the page is sent over the modem connection. If the Phone
number and Pager password fields are blank, the page is routed to the local paging system. If
you do not desire this individual to have pager support, leave the Phone number, Pager
password, and Pager ID fields blank.
Figure 6.3: Subscriber Database Advanced Dialog
If the pager information is entered, this individual may be assigned to three paging groups.
Each group accepts eight members maximum. Remember, it takes time to communicate with a
paging service; therefore, only add members to a group if they need to be there. Otherwise,
you may slow the paging report to people that must respond.
Notice!
A Pager Group may contain members accessed by the local paging system and members that
require dial-up access. Dial-up access typically takes much longer and it may slow pages to
the local paging system.
Bosch Security Systems B.V. Technical Reference Manual
Security Escort pager setup | en 123
2019.08 | V2.18.1.6 | DOC