34
en | System menus and screens
[Save]
[Cancel]
Alarm area setup
In the Transponder Database under the File menu, select the transponder where the alarm
area is to be programmed in. Click the [Edit Data] button, followed by Show areas radio
button and select the desired area.
Figure 4.14: Transponder Area Edit Dialog
2019.08 | V2.18.1.6 | DOC
Clicking this button saves all changes to the database.
Clicking this button closes the dialog. If changes were made, the dialog
below gives you another chance to save the changes by clicking the [Yes]
button.
Technical Reference Manual
Security Escort
Bosch Security Systems B.V.