Dc Power Wiring Sequence Warning - Juniper JSA5800 Hardware Manual

Warnung Der Erdanschluß muß bei der Installation der Einheit immer zuerst hergestellt
und zuletzt abgetrennt werden.
Avvertenza In fase di installazione dell'unità, eseguire sempre per primo il collegamento
a massa e disconnetterlo per ultimo.
Advarsel Når enheten installeres, må jordledningen alltid tilkobles først og frakobles sist.
Aviso Ao instalar a unidade, a ligação à terra deverá ser sempre a primeira a ser ligada, e
a última a ser desligada.
¡Atención! Al instalar el equipo, conectar la tierra la primera y desconectarla la última.
Varning! Vid installation av enheten måste jordledningen alltid anslutas först och
kopplas bort sist.
RELATED DOCUMENTATION
General Electrical Safety Guidelines and Warnings | 0
Prevention of Electrostatic Discharge Damage | 0
AC Power Electrical Safety Guidelines | 0
AC Power Disconnection Warning | 0
DC Power Electrical Safety Guidelines | 80
DC Power Disconnection Warning | 81

DC Power Wiring Sequence Warning

WARNING: Wire the DC power supply using the appropriate lugs. When connecting
power, the proper wiring sequence is ground to ground, +RTN to +RTN, then –40 V to –
60 V. When disconnecting power, the proper wiring sequence is –40 V to –60 V, +RTN
to +RTN, then ground to ground. Note that the ground wire must always be connected
first and disconnected last.
Waarschuwing De juiste bedradingsvolgorde verbonden is aarde naar aarde, +RTN naar
+RTN, en –40 V naar – 60 V. De juiste bedradingsvolgorde losgemaakt is en –40 naar –
60 V, +RTN naar +RTN, aarde naar aarde.
84