Print Method Setting; Carbon Ribbon Setting; Setting Of Media Sensor Type - SATO CL4NX Operator's Manual

2.7.7

Print Method Setting

Set whether to use carbon ribbon or direct thermal
paper to print.
The options are as follows:
• Use Ribbon: Print with carbon ribbon.
• Direct Thermal: Print with direct thermal paper.
Select the print method with the
and then press the right soft button or the
button to confirm.
2.7.8

Carbon Ribbon Setting

Install the carbon ribbon.
*Shows if you have selected Use Ribbon in the print
method setting.
You can check the setting method of carbon ribbon
through the video. Press the
video.
Press the button to stop the video and go back to
the previous screen.
After you complete the carbon ribbon setting, press
the right soft button to go to the next screen.
2.7.9

Setting of Media Sensor Type

Set the type of sensor for sensing media.
The options are as follows:
• None: Disable the media sensor.
• Gap: Use the sensor of transmissive type.
• I-Mark: Use the sensor of reflective type.
*None shows only when you have installed the
cutter unit.
Select the type of media sensor with the
buttons, and then press the right soft button or the
button to confirm.
/ buttons,
button to see the
/
2 Installing the Printer
CL4NX Operator Manual
27