TIENet™ 360 LaserFlow™ Velocity Sensor
Section 4 Setup with 2160 LaserFlow Module
4.2.4 350 Level (Optional)
If your system includes the optional surcharge sensor, it is also
capable of measuring level with a pressure differential trans-
ducer. To set an initial or new level, enter the value in the Adjust
level field. After you click Apply, the level you entered will
appear in the Measurement field.
During setup for the optional surcharge functionality, measure
the distance from the bottom of the channel to the bottom of the
LaserFlow to set the initial level reading. Refer to Figure 4-14.
Figure 4-13 350 Level Measurement tab in Flowlink
4-15