Attach Wired Terminal Strip To Case Board Socket; Insert The Cable Reference Tubing Into The Case Board Reference Port - Teledyne TIENet LaserFlow 360 Installation And Operation Manual

TIENet™ 360 LaserFlow™ Velocity Sensor
Section 2 Preparation and Installation
Figure 2-5 Attach wired terminal strip to case board socket
Figure 2-6 Insert the cable reference tubing into the case board reference port
2-6
5. Insert the reference tubing into the REF AIR port on the
case board, pushing it down inside the silicon tubing. Take
precaution not to bend or kink the reference tubing.
6. Gently tug the cable downward to remove any slack within
the enclosure, taking care not to put any stress on the con-
nections.