TIENet™ 360 LaserFlow™ Velocity Sensor
Section 4 Setup with 2160 LaserFlow Module
E - Remote Distance
Measurement
Figure 4-9 . Remote distance measurement with the 310
remote ultrasonic sensor
4-10
Remote Distance Measurement – The Remote Distance Mea-
surement options are active only when the LaserFlow module is
connected to the TIENet 310 remote ultrasonic sensor
The US Distance to Bottom is the distance (e.g., inches) from
the 310 remote ultrasonic sensor to the bottom of the channel.
See Figure 4-9. Units of measurement are based on user settings.
Note
When using the horizontal sensor mount bracket, the US Dis-
tance to Bottom is measured from the bottom of the horizontal
sensor mount bracket to the bottom of the channel. See Figure
Figure 4-10.
The LaserFlow Distance to Bottom is the distance (e.g.,
inches) from the bottom of the LaserFlow sensor the bottom of
the channel. Units of measurement are based on user settings.
Select the "Horizontal Mount" check box if using the optional
horizontal sensor mount bracket. See Figure 4-10.
Bottom of Channel
.