Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Teledyne PP007
Summary of Contents for Teledyne PP007
- Page 1 PP007-WR-1 PP007-WR-2 PP007-WS-1 PP007-WS-2 Operator’s Manual PP007 Passive Probe...
-
Page 2: Warranty
The customer will be responsible for the transportation and insurance charges for the return of products to the service facility. Teledyne Lecroy will return all products under warranty with transportation charges prepaid. -
Page 3: Safety Instructions
To avoid personal injury or damage to property, review and comply with the following safety precautions. Use product only as specified. Connect only to grounded instruments. Use only with compatible Teledyne LeCroy oscilloscopes that have their BNC input connected to an earth ground. - Page 4 PP007 Passive Probe Do not overload. To avoid electric shock or fire, do not apply any potential to the probe leads that exceeds the maximum rating of the probe. Comply with voltage derating curve. When measuring higher frequency signals, comply with the Voltage vs. Frequency Derating Curve.
-
Page 5: Specifications
PP007 has a large selection of connection accessories, both supplied standard with the probe and available from Teledyne Lecroy as optional accessories. The PP007 is available in two models (-WR for use with WaveRunner and –WS for use with WaveSurfer), differing only in the design of the compensation network. -
Page 6: General Characteristics
PP007 Passive Probe General Characteristics Cable Length 1.3 m (4.3 ft) Weight (probe only) 46 g Operating Environment Temperature, Operating 0 to +50 Temperature, Storage to +71 Altitude, Operating up to 2000 m (6560 ft) Humidity, Operating 5% to 85% RH up to 30° C 5% to 65% RH 30°... -
Page 7: Connectivity Accessories
100 M Frequency (Hz) Connectivity Accessories Teledyne Lecroy provides over 30 individual accessories for the PP007 probe, which enable reliable connections to any physical requirement. In addition to those provided with the standard probe, several optional varieties are available either individually or in sets related to specific applications. -
Page 8: Standard Accessories
PP007 Passive Probe Standard Accessories PK007-001 PK007-002 PK007-003 Sprung Hook Standard Ground Lead Adjustment Tool (4, 5) (7, 8, 9, 10, 11) PK007-004 PK007-007 PK007-008 IC Cap 0.5 mm pitch (green) Rigid Tip, 0.5mm Insulating Cap PK007-009 IC Cap 0.65 mm pitch (blue) PK007-010 IC Cap 0.8 mm pitch (gray) -
Page 9: Optional Accessories
Operator’s Manual Optional Accessories NPUT DAPTERS AND LIPS (17) (18) (19) (20) PK007-017 PK007-018 PK007-022 PK007-023 Single Lead Adapter Dual Lead Adapter Adapter, 2 mm plug Adapter, 4 mm plug (21) (22) (23) PK007-019 PK007-020 PK007-021 Pico Hook™ Micro Clip, Long Micro Clip, Short (24) PK007-031... - Page 10 PP007 Passive Probe ROUND EADS (25) (26) PK007-024 PK007-025 Probe Tip Ground Lead w 0.8 mm Socket Probe Tip Ground Lead with Alligator Clip (28) (29) (30) PK007-026 PK007-027 PK007-028 Ground Lead with mini clip Ground Lead, 8 mm socket...
-
Page 11: Use And Maintenance
Use of PCB Adapter The PCB adapter (Teledyne Lecroy P/N PK007-015) is intended to be designed into and permanently installed in circuit boards to provide a reliable, high frequency test point which eliminates the need to hand hold the probe. -
Page 12: Probe Compensation
PP007 Passive Probe Probe Compensation Proper compensation of the probe is required to assure good amplitude accuracy in the dynamic portions of the waveform being measured. LF compensation matches the probe to differences in oscilloscope input capacitance. The LF compensation should always be checked and adjusted as needed when first connecting a passive probe to the oscilloscope input. - Page 13 Operator’s Manual Tip Selection and Replacement The PP007-xx probe is supplied with two tip styles. The spring-loaded tip, which is installed when the probe is shipped, combines a sharp point with on- axis compliance. This provides reliable connection under a wide range of physical interconnect situtations.
-
Page 14: Environmental Compliance
PP007 Passive Probe Certifications Teledyne LeCroy certifies compliance to the following standards as of the date of publication. See the EC Declaration of Conformity shipped with the product for current certifications. EC Declaration of Conformity - Safety The probe meets intent of EC Directive 2014/35/EU for Product Safety. - Page 16 928597-00 Rev A July, 2017...