System Utility - ADTRAN Total Access 850 System Manual

Section 4 User Interface Guide
S C > N
YSTEM ONFIG
This displays the current status of the time negotiation process. If an error is displayed, check all
connections and configurations to try to resolve the problem.
S U
YSTEM TILITY
Use the
S U
YSTEM TILITY
S U > U
YSTEM TILITY
Select the firmware upgrade method and perform upgrade from this menu.
S U > U
YSTEM TILITY
The customer can update firmware when unit enhancements are released.
The two methods for upgrading are
information.) requires a TFTP server running on the network. The unit starts a TFTP client function
TFTP
which gets the upgrade code from the TFTP server. Selecting
through the CRAFT port using any PC terminal emulator with XMODEM capability. The factory default is
TFTP .
S U > U
YSTEM TILITY
This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is
configured) of the TFTP server. The factory default is no entry in the
S U > U
YSTEM TILITY
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the
upgrade code. The factory default is no entry in the
88
T > S
ETWORK IME TATUS
menu to view and set the system parameters shown in Figure 5.
Figure 5. System Utility Menu
F
PGRADE IRMWARE
F
PGRADE IRMWARE
and
XMODEM
F
PGRADE IRMWARE
F
PGRADE IRMWARE
© 2004 ADTRAN, Inc.
> T M
RANSFER ETHOD
. (See the DLP section of this manual for more
TFTP
XMODEM
> TFTP S A
ERVER DDRESS
TFTP S
> TFTP S F
ERVER ILENAME
TFTP S F
ERVER ILENAME
Total Access 850 System Manual
will load the upgrade code
A field.
ERVER DDRESS
field.
64203376L1-1B