Main Menu And System Control; Selecting The Appropriate Menu - ADTRAN Total Access 850 System Manual

Total Access 850 System Manual
To do this...
Increment the value of certain types of fields by one when you paste information
into those fields
Decrement the value of certain types of fields by one when you paste information
into those fields
Save the current configuration immediately to RAM
Insert a new list item
For example, add a new item to the T
while the cursor is over the index number.
Delete a list item
For example, delete an item from the T
<D> while the index number is active.
Getting Help
The bottom line of the terminal menu window contains context-sensitive help information. When the
cursor is positioned over a set of configuration items, a help message displays (when available) providing a
description of the item. When more detailed help is available for a particular item, ^A displays at the
bottom of the window. At this point, pressing <CTRL+A> displays a pop-up help screen with information
about the item.
Press <CTRL+Z> to activate a help screen that displays the available keystrokes you can use to navigate
the main menu system. Press <Exit> to remove these help screens.
2.

MAIN MENU AND SYSTEM CONTROL

Selecting the Appropriate Menu

The main menu system is the access point to all other operations. Each menu item has several functions
and submenus that identify and provide access to specific operations and parameters. Use the following
chart to help select the appropriate menu.
To do this...
Review and monitor general system information for the Total Access 850
Set up the operational configuration for the Total Access 850
Upgrade firmware, perform config transfers, ping, and access terminal mode
Review and configure settings for all interfaces (including installed modules)
Configures the Layer 2 protocol for the various interfaces (T1, Ethernet, etc.)
and provides all applicable L2 status information
Configure the bridging parameters and view applicable bridging statistics
64203376L1-1B
U connection list by pressing <I>
ELNET SER
U connection list by pressing
ELNET SER
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
Press this key...
>
<
CTRL+W
I
D
Go to this menu...
S I
YSTEM NFO
S C
YSTEM ONFIG
S U
YSTEM TILITY
I
NTERFACES
L2 P
ROTOCOL
B
RIDGE
71