ADTRAN Total Access 850 System Manual page 156

Section 4 User Interface Guide
S P
POOFED
Spoofed port number for the translation. The Total Access 850 often needs to use the spoofed
ports to determine which private device to translate the packet to. This would be necessary if
multiple applications using the same private port were occurring simultaneously.
S P
ERVER ORT
Port number used by the server (public device).
T T
OTAL IME
Time the translation has been unused, in seconds.
I C
N OUNT
Number of inbound packets using this translation.
O C
UT OUNT
Number of outbound packets using this translation.
NAPT A
DDRESS
(Read only) Displays the NAPT address for the router. This will either be the interface address or
the user-specified NAPT address.
E C
NTRY OUNT
The number of translation entries that are currently available in the
Total Access 850 supports up to 2000 active translations at any one time.
E O
NTRY VERFLOW
The number of overflow
reached, the Total Access 850 will not add new translations, but continues to keep a count of any
new translation requests it cannot accommodate.
RIP
Use this menu to enable RIP on this interface.
V
ERSION
Enables or disables RIP and specifies the RIP protocol. Choices are:
V1 (RIP Version 1) or
156
ORT
U
NUSED
C
OUNT
entries. After the maximum number of translations is
NAT V
IEW
V2 (RIP Version 2). The default is
© 2004 ADTRAN, Inc.
Total Access 850 System Manual
table. The
NAT V
IEW
O (which disables RIP),
FF
O
FF
64203376L1-1B