Mib Variables Supported By Tdm Units; Mibs Supported By Atm Units - ADTRAN Total Access 850 System Manual

Section 7 MIBs
(T1 WAN interface only):
From ADTRAN-IADVOICE-MIB:
4.

MIB VARIABLES SUPPORTED BY TDM UNITS

SNMPv2 states the supported MIB variables by the following method:
The unit will have a MIB called TA 6XX.mi2 that will describe the SNMP variables supported. This MIB
will contain an Agent Capabilities module that will describe the SNMP variables supported.
5.

MIBs Supported by ATM Units

Standard RFC MIBs:
RFC1213.mib
RFC1406.mib
RFC1695.mib
Enterprise MIBs:
Adtran.mib
adtartr_trap.mib
RFC1155-SMI, RFC1212-MIB, and RFC1215-MIB are also needed and should come
standard with any SNMP Management software.
All ATM MIBs are SNMPv1.
282
adIadDs1CRC - 1003217
adIadDs1LCV - 1003218
adIadDs1SLP - 1003219
adIadVoiceTestStatusActive - 1003401
adIadVoiceTestStatusClear - 1003402
adIadVoiceAlarmBitActive - 1003403
adIadVoiceAlarmBitInactive - 1003404
adIadVoiceGatewayDown - 1003405
adIadVoiceGatewayUp - 1003406
adIadVoiceaLifeLineActivated - 1003407
adIadVoiceaLifeLineDeactivated - 1003408
RFC1213-MIB
DS1-MIB (T1 interface only)
ATM-MIB
ADTRAN-MIB
ADTRAN-ADTARTR_TRAP-MIB
© 2004 ADTRAN, Inc.
Total Access 850 System Manual
64203376L1-1B