ADTRAN Total Access 850 System Manual page 266

Section 5 DLP-17
Perform the steps below in the order listed.
1. Connect the Total Access 850 unit to your VT100 system (details found in DLP-1, Connecting a VT100
Terminal or PC to the CRAFT Port).
2. Log in to the system with maximum rights (details are in DLP-2, Logging in to the System).
3. From the DS0 M
APS
4. From the DS0 M
APS
for yes to confirm the Active Map change and press <Enter>. The following screen appears.
The second T1 connected to the DSX port may only be used for voice connections
(FXS/FXO). The second T1 must be connected to the integrated DSX port, not the DSX-1
Card.
266
menu, select the A
CTIVE
> A M menu, select the D
CTIVE APS
Figure 1. Dual T1 Map
© 2004 ADTRAN, Inc.
Total Access 850 System Manual
M option and press <Enter>.
AP
T1 M option; press <Enter>. Select "Y"
UAL AP
64203376L1-1B