ADTRAN Total Access 850 System Manual page 113

Total Access 850 System Manual
I (UBR1TE) > C
NTERFACE
DC sealing current is only applicable if the mode is
Adjacent-to-Customer applications. Default is
I (UBR1TE) > S
NTERFACE
View the interface status information for the UBR1TE Module.
I (UBR1TE) > S
NTERFACE
Displays the slot number for the installed UBR1TE Module.
I (UBR1TE) > S
NTERFACE
This status field indicates whether an NT1 is communicating with the ISDN switch.
I (UBR1TE) > S
NTERFACE
Displays synchronization between the UBR1TE card and the NT1 on the loop side of the card. Sync
displays Y or N .
ES O
I (UBR1TE) > S
NTERFACE
Displays synchronization between the ISDN switch and the UBR1TE card on the T1 network side. Sync
displays or .
Y N
ES O
I (UBR1TE) > S
NTERFACE
Indicates a CRC error has been received on the loop side of the card (indicating it came from the NT1).
I (UBR1TE) > S
NTERFACE
Indicates a CRC error has been received on the carrier side of the card (indicating it came from the ISDN
switch).
I (UBR1TE) > S
NTERFACE
Indicates whether a test is in progress.
I (UBR1TE) > T
NTERFACE
These options are used to initiate tests.
I (UBR1TE) > T
NTERFACE
Displays the slot number for the installed UBR1TE Module.
I (UBR1TE) > T
NTERFACE
Initiates a test on the first B channel (B1) of the ISDN circuit. The following tests are available:
N
ONE
64203376L1-1B
> S C
ONFIG EALING
LULT
E
NABLED
TATUS
> S
TATUS LOT
> A B
TATUS CT IT
> L
TATUS OOP
> C
TATUS ARRIER
> R L CRC E
TATUS X OOP
> R C
TATUS X ARRIER
> T S
TATUS EST TATUS
EST
> S
EST LOT
> B1 T
EST EST
No active test.
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
URRENT
. Sealing current should be present for
.
RROR
CRC E
RROR
113