Contents Of Adtran Shipments; Telecommunications Codes; Grounding Instructions - ADTRAN Total Access 850 System Manual

Total Access 850 System Manual

Contents of ADTRAN Shipments

Your ADTRAN shipment of the Total Access 850 chassis includes the following items:
• The Total Access 850 Base Unit
• The Total Access 850 Series System CD
• Wallmount brackets and screws
• RJ-45 to RJ-45 8-pin cable (15 ft) - ADTRAN P/N 3125M008
• UL 1950 Notice Card - ADTRAN P/N 61200375L1-17
Customer must supply Ethernet cable and the DB-9 serial cable for configuration via the
VT100
CRAFT
4.

TELECOMMUNICATIONS CODES

The installation configurations codes are given below.
5.

GROUNDING INSTRUCTIONS

To following paragraphs provide grounding instruction information from the Underwriters' Laboratory
UL1950 Standard for Safety of Information Technology Equipment Including Electrical Business
Equipment, of July 28, 1995.
An equipment grounding conductor that is not smaller in size than the ungrounded branch-circuit supply
conductors is to be installed as part of the circuit that supplies the product or system. Bare, covered, or
insulated grounding conductors are acceptable. Individually covered or insulated equipment grounding
conductors shall have a continuous outer finish that is either green, or green with one or more yellow
stripes. The equipment grounding conductor is to be connected to ground at the service equipment.
The attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type,
64203376L1-1B
interfaces.
Table 1. Total Access 850 System Codes
CODE IN
PC F
IC E
TC X
Table 2. Power Supply Unit Codes
CODE IN
PC F
IC E
TC A
© 2004 ADTRAN, Inc.
Section 3 Network Turnup Procedure
OUT
C
–
X
OUT
C
–
–
57