ADTRAN Total Access 850 System Manual page 181

Total Access 850 System Manual Section 4 User Interface Guide
DS0 M > E /V M 1 > RBS
APS DIT IEW AP
Robbed Bit Signaling. Default is . Once a and port are assigned, this will automatically change to
N/A
SLOT
or . The unit automatically assigns where is not an option. preserves the signaling bits
O O O RBS O
N FF FF N
between the connections. ignores the signaling bits. For the , defaults to . The
O FXS RBS O RBS
FF N
parameter remains at N/A for the TA IAD , because RBS is not applicable to data connections.
Map 2 menus are identical to Map 1. Please use the menu explanations above for Map 2.
64203376L1-1B © 2004 ADTRAN, Inc. 181