ADTRAN Total Access 850 System Manual page 242

Section 5 DLP-10
Perform the steps below in the order listed.
1. Connect to the Total Access 850 using the 10/100BASET interface.
If you are not already connected to the unit's
procedure in DLP-5, Connecting to the Total Access 850 Using Telnet, to connect to the unit.
2. Log in to the unit using the read-write password (see DLP-2, Logging in to the System, for details).
3. Verify the TFTP server is running on the network.
A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose
S > P
TART
4. Go to the S U
YSTEM
5. Verify the T
RANSFER
TFTP is not secure. No passwords are required for client access. Anyone can access
files through the IP port on the server machine if they know the target file's name.
6. Set the TFTP S
ERVER
Program.
If you are using the ADTRAN TFTP server, the IP address displays in the S
For other TFTP servers, please refer to the appropriate documentation.
7. Change TFTP S
ERVER
retrieved from the remote server.) If the ADTRAN Utilities TFTP server is used and no path is
specified, the configuration file is retrieved from the default ADTNUTIL directory. To retrieve a
configuration file from a particular folder, enter the entire filename including path.
Some TFTP servers constrain the format of the filename depending on the operating system of the
server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period and three extension characters).
8. Select the L
OAD AND
request.
The Total Access 850 system is rebooted immediately after a configuration is
successfully loaded. No additional confirmation is requested, and any online sessions
will be terminated.
9. View C T
URRENT RANSFER
242
> ADTRAN U
ROGRAMS
menu and select the C
TILITY
M is set to TFTP.
ETHOD
IP A to the IP address of the machine running the TFTP Server
DDRESS
F to a unique filename. (This will be the name of the configuration file
ILENAME
U C menu field and press <Enter>. Respond with Y to confirm the
SE ONFIG
S to verify the progress of the current upload.
TATUS
© 2004 ADTRAN, Inc.
port using Telnet client software, use the
10/100BASET
> TFTP S
TILITIES ERVER
T
ONFIGURATION RANSFER
Total Access 850 System Manual
to start the server.
menu; press <Enter>.
TATUS
64203376L1-1B
field.