System Utility - ADTRAN 604 System Manual

Section 4 User Interface Guide
S C > N
YSTEM ONFIG
Since some areas of the world use Daylight Savings Time, the unit is designed to adjust the time on the
first Sunday in April and the last Sunday in October accordingly if this option is turned on. The factory
default is .
Y
ES
S C > N
YSTEM ONFIG
This is the IP address of the time server that the unit will request and receive time from. The factory default
is no entry in the host address field.
S C > N
YSTEM ONFIG
This is the interval of time between each request the unit sends out to the time server. A smaller refresh
time guarantees that the unit receives the correct time from the server and corrects possible errors more
quickly. This may be more taxing on the machine. A range of refresh times is available for the user to
decide which is best for their unit. Choices include
, 40 , 45 , 50
MINS MINS MINS
S C > N
YSTEM ONFIG
This displays the current status of the time negotiation process. If an error is displayed, check all
connections and configurations to try to resolve the problem.
S U
YSTEM TILITY
Use the
S U
YSTEM TILITY
64
T > A
ETWORK IME DJUST FOR
T > H
ETWORK IME OST
T > R
ETWORK IME EFRESH
and
, 55 , 60
MINS MINS
T > S
ETWORK IME TATUS
menu to view and set the system parameters shown in Figure 5.
Figure 5. System Utility Menu
© 2004 ADTRAN, Inc.
Total Access 600 Series System Manual
D S
AYLIGHT
A
DDRESS
5 , 10 , 15
MINS MINS MINS
. The factory default is
MINS
AVING
, 20 , 25 , 30
MINS MINS
.
60
MINS
61200624L1-1B
, 35
MINS