ADTRAN Total Access 850 System Manual page 77

Total Access 850 System Manual
S C > M
YSTEM ONFIG
Set up the Telnet authentication method from this menu. The choices are
, and
L /R R
OCAL ADIUS ADIUS
Authentication first, and if that fails, it will try Radius Authentication.
will try Radius authentication first, and if that fails, it will try Local Password authentication. The default is
L P .
OCAL ASSWORD
S C > M
YSTEM ONFIG
Defines the TCP port number used when establishing a Telnet session. Normal Telnet port is 23. Enter a
customized port number if desired.
S C > M
YSTEM ONFIG
Add Telnet users and control the Telnet access conditions through this menu.
#
Display the index number of the Telnet users. Up to four users can be configured for access to the
unit. Each user can be assigned a security level and idle time.
N
AME
The name is a text string of the user name for this session. You can enter up to 15 characters in this
field. The factory default is no entry in the
P
ASSWORD
When the authenticating method is password, or password radius, this text string is used for the
password. You can enter up to 30 characters in this field. The factory default is no entry in this field.
I T ( )
DLE IME MINS
This sets the amount of time in minutes you can be idle before you are automatically logged off. The
factory default is 10
L
EVEL
This is the security level granted to the user. Table 3 on page 78 gives a brief description of each
level. The factory default is
64203376L1-1B
> T
ANAGEMENT ELNET
.
/L L /R
OCAL OCAL ADIUS
> T
ANAGEMENT ELNET
> T
ANAGEMENT ELNET
. The range is
MINUTES
F .
ULL
© 2004 ADTRAN, Inc.
A > A
CCESS UTHEN
indicates that the unit will try Local Password
R
P
ORT
A > U L
CCESS SER
N field.
AME
1 255 .
TO MINUTES
Section 4 User Interface Guide
M
ETHOD
,
L P R
OCAL ASSWORD ADIUS
indicates that the unit
/L
ADIUS OCAL
IST
,
77