ADTRAN Total Access 850 System Manual page 174

Section 4 User Interface Guide
N
UM
Indicates the entry number in the IP Filter Defines table.
N
AME
Identifies the filter entry. Default is no entry in name field.
F T
ILTER YPE
Specifies a
N
ORMAL
or forwarded according to the filter. When a
documented without affecting traffic flow. (Use the
logging to view the packet contents.)
S A
RC DDR
IP address compared to the source address. Value is in dotted decimal format. Default is
S M
RC ASK
Bits which are used in the source comparison. Value is in dotted decimal format. Default is
D A
EST DDR
IP address compared to the destination address. Value is in dotted decimal format. Default is
D M
EST ASK
Bits which are used in the destination comparison. Value is in dotted decimal format. Default is
0.0.0.0.
S P
RC ORT
IP source port number used for comparison. Value is in decimal format. Range:
.
0
S P C
RC ORT OMP
Type of comparison that is performed. Default is
means ports equal to
=
means port not equal to
=
NOT
means port greater than
>
means port less than
<
None - means the source port is not compared
174
or filter. When a
D
EBUG
© 2004 ADTRAN, Inc.
filer is applied to an interface, traffic is blocked
N
ORMAL
filter is applied, packets that match the filter are
D
EBUG
filter with the Syslog or Terminal Mode
D
EBUG
.
N
ONE
Total Access 850 System Manual
0.0.0.0
. Default is
0 - 65535
64203376L1-1B
.
.
0.0.0.0
0.0.0.0.