ADTRAN Total Access 850 System Manual page 128

Section 4 User Interface Guide
L2 P (T1 ATM F
ROTOCOL
Use the menu to select the
L2 P
ROTOCOL
view the status as shown in Figure 8. The following menus are for Total Access 850 systems using T1
ATM firmware.
For convenience, the following heading notations identify the type of firmware and L2 protocol
configured in the Total Access 850 system:
Firmware and
RCU type. (For
example, T1 TDM,
T1 ATM, SDSL.)
128
)
IRMWARE
L2 P
ROTOCOL
Figure 9. L2 Protocol (T1 TDM) Menu
L2 Protocol (T1 ATM – T1 – ATM)
© 2004 ADTRAN, Inc.
Total Access 850 System Manual
, configure the protocol specific parameters, and
Interface type.
(For example,
T1, Ethernet,
etc.)
Configured Layer 2
protocol. (For
example, ATM or
CuMTN.)
64203376L1-1B