Link Aggregation Setting; Figure 62 Advanced Application > Link Aggregation > Link Aggregation Setting - ZyXEL Communications GS-4012 User Manual

Table 36 Advanced Application > Link Aggregation Status (continued)
LABEL
Synchronized
Ports
Aggregator ID
Status

15.4 Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting to display
the screen shown next. See
aggregation.
Figure 62 Advanced Application > Link Aggregation > Link Aggregation Setting
GS-4012F/4024 User's Guide
DESCRIPTION
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Link Aggregator ID consists of the following: system priority, MAC address, key, port
priority and port number. Refer to
this field.
This field displays how these ports were added to the trunk group. It displays:
• Static - if the ports are configured as static members of a trunk group.
• LACP - if the ports are configured to join a trunk group via LACP.
Section 15.1 on page 133
Chapter 15 Link Aggregation
Section 15.2.1 on page 134
for more information on link
for more information on
135