Chapter 23 Authentication & Accounting
23.3.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the
difference between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize
the Calling-Station-Id attribute):
Table 65 RADIUS Attributes - Exec Events via Console
ATTRIBUTE
User-Name
NAS-Identifier
NAS-IP-Address
Service-Type
Acct-Status-Type
Acct-Delay-Time
Acct-Session-Id
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
Table 66 RADIUS Attributes - Exec Events via Telnet/SSH
ATTRIBUTE
User-Name
NAS-Identifier
NAS-IP-Address
Service-Type
Calling-Station-Id
Acct-Status-Type
Acct-Delay-Time
Acct-Session-Id
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
23.3.2.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session they are sent:
Table 67 RADIUS Attributes - Exec Events via Console
ATTRIBUTE
User-Name
NAS-IP-Address
NAS-Port
Class
Called-Station-Id
196
START
INTERIM-UPDATE
START
INTERIM-UPDATE
START
INTERIM-UPDATE
STOP
STOP
STOP
GS-4012F/4024 User's Guide