Table of Contents
Advertisement
Chapter 48 Interface Commands
• Set the outgoing traffic ports as the CPU (0), seven (7) and eight (8).
sysname(config)# vlan-type port-based
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# egress set 0,7,8
48.2.11 qos priority
Syntax:
qos priority <0 .. 7>
where
<0 .. 7>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# qos priority 4
48.2.12 name
Syntax:
name <port-name-string>
where
<port-name-string>
An example is shown next.
• Enable port one for configuration.
• Set a name for the port.
sysname(config)# interface port-channel 1
sysname(config-interface)# name Test
48.2.13 speed-duplex
Syntax:
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
400
=
Sets the quality of service priority for a port.
=
Sets a name for your port interface.
GS-4012F/4024 User's Guide
Advertisement
Table of Contents
Troubleshooting
