Figure 27 Status > Port Details; Table 7 Status: Port Details - ZyXEL Communications GS-4012 User Manual

Figure 27 Status > Port Details
The following table describes the labels in this screen.

Table 7 Status: Port Details

LABEL
Port Info
Port NO.
Name
Link
Status
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
GS-4012F/4024 User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the
cable type (Copper or Fiber).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port
(see Section 11.1 on page 109
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
Chapter 6 System Status and Port Statistics
for more information).
73