Enable Mode; Table 138 Command Summary: Enable Mode - ZyXEL Communications GS-4012 User Manual

Chapter 45 Introducing Commands

45.12.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 138 Command Summary: Enable Mode

COMMAND
baudrate
<1|2|3|4|5>
boot config <index>
clear arp inspection
arp inspection
arp inspection
arp inspection
dhcp snooping
database
loopguard
configure
copy running-config
tftp <ip>
<remote-file>
running-config
interface port-
channel <port>
<port-list>
running-config
interface port-
channel <port>
<port-list>
tftp
disable
enable
334
DESCRIPTION
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
Restarts the system with the
specified configuration file.
Delete all ARP inspection filters
filter
from the Switch.
Delete all ARP inspection log
log
entries from the Switch.
Delete all statistics records of
statistics
ARP packets going through the
Switch.
Delete statistics records of ARP
statistics vlan
packets going through the Switch
<vlan-list>
for the specified VLAN(s).
Delete all statistics records of
statistics
DHCP requests going through the
Switch.
Clears all loopguard counters.
Accesses Configuration mode.
See
Backs up running configuration to
the specified TFTP server with the
specified file name.
Clones (copies) the attributes
from the specified port to other
ports.
Copies the specified attributes
[bandwidth-limit
from one port to other ports.
....]
Restores configuration with the
config <index>
specified filename from the
<ip> <remote-
specified TFTP server to the
file>
specified configuration file on the
router.
Restores firmware via TFTP.
flash <ip>
<remote-file>
Exits Enable (or privileged) mode.
Accesses Enable (or privileged)
mode. Enables the highest
privilege level for executing
commands.
Section 45.12.3 on page 343.
GS-4012F/4024 User's Guide
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
0