ZyXEL Communications GS-4012 User Manual page 349

Table 139 Command Summary: Configuration Mode (continued)
COMMAND
name-server
route
source binding
<mac-addr> vlan
<vlan-id> <ip>
lacp
system-priority
logins username <name>
password <pwd>
username <name>
logout
loopguard
mac-
authenticat
ion
nameprefix <name-
string>
password <name-
string>
timeout <1-3000>
mac-aging- <10-3000>
time
GS-4012F/4024 User's Guide
DESCRIPTION
Sets the default gateway's IP
default-gateway
address for the out-of-band
<ip>
management port.
Sets the IP address of a domain
<ip>
name server.
Creates a static route.
<ip> <mask>
<next-hop-ip>
Sets the metric of a static route
<ip> <mask>
or deactivates a static route.
<next-hop-ip>
[metric
<metric>] [name
<name>]
[inactive]
Creates a static binding for
DHCP snooping and ARP
inspection.
Specifies the port(s) for this static
interface port-
binding.
channel
<interface-id>
Enables Link Aggregation
Control Protocol (LACP).
Sets the priority of an active port
<1-65535>
using LACP.
Configures up to four read-only
login accounts.
Assigns a privilege level to user
privilege <0-
accounts.
14>
Exits from the CLI.
Enables loopguard on the
Switch.
Enables MAC authentication on
the Switch.
Sets the prefix appended to the
MAC address before it is sent to
the RADIUS server for
authentication.
Sets the password sent to the
RADIUS server for clients using
MAC authentication.
Specifies the amount of time
before the Switch allows a client
MAC address that fails
authentication to try and
authenticate again.
This settings is superseded by
the mac-aging-time
command.
Sets learned MAC aging time.
Chapter 45 Introducing Commands
PRIVILEGE
13
13
13
13
13
13
13
13
14
14
0
13
13
13
13
13
13
349