User And Enable Mode Commands; Overview; Show Commands; Show System-Information - ZyXEL Communications GS-4012 User Manual

C
H A P T E R
This chapter describes some commands which you can perform in the User and Enable modes.

46.1 Overview

The following command examples show how you can use User and Enable modes to diagnose
and manage your

46.2 show Commands

These are the commonly used

46.2.1 show system-information

Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
sysname# show sys
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
sysname#
GS-4012F/4024 User's Guide
User and Enable Mode
.
Switch
commands.
show
: GS-4012F
:
:
: 00:19:cb:00:00:02
: V3.80(TS.0)b5 | 04/13/2007
: 3187522
: 6:17:27 (228e9a ticks)
: V3.1 | 03/08/2007
: RAS Apr 12 2007 12:07:33
: GS-4012F
46
Commands
377