ZyXEL Communications GS-4012 User Manual page 342

Chapter 45 Introducing Commands
Table 138 Command Summary: Enable Mode (continued)
COMMAND
subnet-vlan
system-
information
tacacs-server
tacacs-accounting
time
timesync
trunk
version
vlan
vlan-stacking
vlan1q
ssh <1|2>
<[user@]dest-ip>
test interface port-
channel <port-
list>
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help
342
DESCRIPTION
Displays known SSH hosts
known-hosts
information.
Displays internal SSH public and
key
private key information.
<rsa1|rsa|dsa>
Displays current SSH session(s).
session
Displays subnet based VLAN
settings on the Switch.
Displays general system
information.
Displays TACACS+ server
settings.
Displays TACACS+ accounting
server settings.
Displays current system time and
date.
Displays time server information.
Displays link aggregation
information.
Displays the firmware version
running on the Switch.
Displays the firmware version on
flash
the flash memory of the Switch.
Displays the status of all VLANs.
Displays the status of the
<vlan-id>
specified VLAN.
Displays VLAN stacking settings.
Displays GVRP settings.
gvrp
Displays port isolation settings.
port-isolation
Connects to an SSH server with
the specified SSH version.
Connects to an SSH server with
[command </>]
the specified SSH version and
addition commands to be
executed on the server.
Performs an internal loopback test
on the specified ports.
Determines the path a packet
takes to a device.
Displays help information for this
command.
PRIVILEGE
3
3
3
3
0
3
3
3
3
3
0
0
3
3
3
3
3
0
0
13
0
0
GS-4012F/4024 User's Guide