ZyXEL Communications GS-4012 User Manual page 370

Chapter 45 Introducing Commands
Table 140 interface port-channel Commands (continued)
COMMAND
ge-spq
gvrp
help
igmp-filtering
igmp-group-
limited
igmp-immediate-
leave
igmp-querier-mode
<auto|fixed|edge>
inactive
ingress-check
intrusion-lock
ipmc egress-
untag-vlan <vlan-
id>
loopguard
mac-
authentication
mirror
multicast-limit
370
DESCRIPTION
Enables strict priority queuing
<q0|q1|...|q7>
starting with the specified queue
and subsequent higher queues on
the Gigabit ports.
Enables this function to permit
VLAN groups beyond the local
Switch.
Displays a description of the
interface port-channel commands.
Applies the specified IGMP
profile <name>
filtering profile.
Enables the IGMP group limiting
feature.
Sets the maximum number IGMP
number <number>
groups allowed.
Enables the IGMP immediate
leave function.
Sets the IGMP query mode for the
port.
Disables the specified port(s) on
the Switch.
Enables the device to discard
incoming frames for VLANs that
are not included in a port member
set.
Enables intrusion lock on the
port(s) and a port cannot be
connected again after you
disconnected the cable.
Enables the port(s) to remove
specified VLAN tag from IP
multicasting packets before
forwarding.
Enables the loopguard feature on
the port(s).
Enables MAC authentication via a
RADIUS server on the port(s).
Enables port mirroring in the
interface.
Enables port mirroring for
dir <ingress|
incoming, outgoing or both
egress|both>
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
Enables the port(s) multicast limit. 13
Sets how many multicast packets
<pkt/s>
the port(s) receives per second.
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
GS-4012F/4024 User's Guide