General Configuration Mode; Table 139 Command Summary: Configuration Mode - ZyXEL Communications GS-4012 User Manual

Table 138 Command Summary: Enable Mode (continued)
COMMAND
write memory

45.12.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 139 Command Summary: Configuration Mode

COMMAND
aaa accounting
GS-4012F/4024 User's Guide
DESCRIPTION
Saves current configuration to the
configuration file the Switch is
currently using.
Saves current configuration to the
<index>
specified configuration file on the
Switch.
DESCRIPTION
Enables accounting of command
commands
sessions and specifies the
<privilege>
minimum privilege level for which
stop-only
command sessions should be
tacacs+
recorded.
Enables sending accounting
commands
information for command
<privilege>
sessions to all configured
stop-only
accounting servers at the same
tacacs+
time.
[broadcast]
Enables accounting of IEEE
dot1x <start-
802.1x authentication sessions
stop|stop-only>
and specifies the mode and
<radius|tacacs+
protocol method.
>
Enables sending accounting
dot1x <start-
information for IEEE 802.1x
stop|stop-only>
authentication sessions to all
<radius|tacacs+
configured accounting servers at
> [broadcast]
the same time.
Enables accounting of
exec <start-
administrative sessions via SSH,
stop|stop-only>
Telnet and console port and
<radius|tacacs+
specifies the mode and protocol
>
method.
Enables sending accounting
exec <start-
information for administrative
stop|stop-only>
sessions via SSH, Telnet and
<radius|tacacs+
console port sessions to all
> [broadcast]
configured accounting servers at
the same time.
Enables accounting of system
system
events and specifies the protocol
<radius|tacacs+
method.
>
Enables sending accounting
system
information for system events to
<radius|tacacs+
all configured accounting servers
> [broadcast]
at the same time.
Chapter 45 Introducing Commands
PRIVILEGE
13
13
PRIVILEGE
13
13
13
13
13
13
13
13
343