Mirror - ZyXEL Communications GS-4012 User Manual

where
pir <Kbps>
cir <Kbps>
egress <Kbps>
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth control.
• Set the outgoing traffic bandwidth limit to 5000Kbps.
• Set the guaranteed bandwidth allowed for incoming traffic to 4000Kbps.
• Set the maximum bandwidth allowed for incoming traffic to 8000Kbps.
sysname(config)# interface port-channel 1
sysname(config-interface)# bandwidth-limit
sysname(config-interface)# bandwidth-limit egress 5000
sysname(config-interface)# bandwidth-limit cir 4000
sysname(config-interface)# bandwidth-limit pir 8000

48.2.5 mirror

The
mirror
Syntax:
mirror
mirror dir <ingress|egress|both>
where
dir
<ingress|egress|both>
An example is shown next.
• Enable port mirroring.
• Enable the monitor port 3.
• Enable ports 1, 4, 5 and 6 for configuration.
• Enable port mirroring on the ports.
GS-4012F/4024 User's Guide
= Sets the maximum bandwidth allowed for incoming traffic.
= Sets the guaranteed bandwidth allowed for incoming traffic.
= Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the Switch.
command enables port mirroring on the interface.
= Enables port mirroring for incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another
or all ports for external analysis.
Chapter 48 Interface Commands
397