Figure 35-7 Menu 24.10 System Maintenance: Time And Date Setting; Table 35-4 Time And Date Setting Fields - ZyXEL Communications ZyWall 10 User Manual

Figure 35-7 Menu 24.10 System Maintenance: Time and Date Setting

The following table describes the fields in this screen.
FIELD
Use Time Server
when Bootup
Time Server
Address
Current Time
New Time
Current Date
New Date
System Maintenance & Information
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= NTP (RFC-1305)
Time Server Address= tick.stdtime.gov.tw
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT+0800
Daylight Saving= No
Start Date (mm-dd):
End Date (mm_dd):
Press ENTER to Confirm or ESC to Cancel:

Table 35-4 Time and Date Setting Fields

Enter the time service protocol that your timeserver sends when you turn on the
ZyWALL. Not all timeservers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) the default, is similar to Time (RFC-868).
None enter the time manually.
Enter the IP address or domain name of your timeserver. Check with your
ISP/network administrator if you are unsure of this information. The default is
tick.stdtime.gov.tw
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you reenter this menu.
Enter the new date in year, month and day format.
ZyWALL 10~100 Series Internet Security Gateway
00 : 00 : 00
11 : 23 : 16
2000 - 01 - 01
2001 - 03 - 01
DESCRIPTION
01 – 01
01 – 01
35-7