Editing A Performance - Yamaha S90 ES Owner's Manual

Editing a Performance

The Performance Edit mode ([PERFORM]
different Parts (Voices)—by editing the various parameters. The Voices can be selected from the internal tone generator or
the installed Plug-in Boards. After assigning different Voices to separate ranges of the keyboard, edit the detailed
parameters in the Performance Edit mode.
Press the [PERFORM] button to enter the Performance mode, then select a Performance to be edited
1
(page 34).
2
Press the [EDIT] button to enter the Performance Edit mode.
3
Call up the Common Edit display or Part Edit display.
Use the Part Edit to edit the parameters for each Part.
Use Common Edit to edit the parameters for all of the Parts.
While in the Voice Edit mode, you can switch between
the Common Edit display amd the Part Edit display
as shown below.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
Indicates a Common Edit
display.
[EDIT]) lets you create your own original Performances—containing up to four
DRUM
PRE 1
KITS
FAVORITES A. PIANO
A
SYN LEAD
1
COMMON
9
Common Edit
Calling up the Part Edit display
PRE 2 PRE 3 PRE 4
Press the desired Part number from the
PERF. PART [1] - [4] buttons to call up the
KEYBOARD ORGAN GUITAR/
Part Edit display.
PLUCKED
B C D
Indicates the display for editing Part 1.
SYN PAD/ SYN COMP CHROMATIC
CHOIR PERCUSSION
2 3 4
ELEMENT/PERF. PART/ZONE
10 11 12
To switch between the Part 1 - 4
display and the Plug-in Part 1 - 3
display, press the [F6] button.
You can select the four Performance Parts
from this group of seven.
Plug-in part 1 (PLG1) Edit
Plug-in part 2 (PLG2) Edit
Plug-in part 3 (PLG3) Edit
Editing a Performance
F
Part1 Edit
Part2 Edit
Parts to which
Internal voices
Part3 Edit
are assigned
Part4 Edit
Parts to which
Plug-in Board
voices are
assigned
Owner's Manual
6
53