Yamaha S90 ES Owner's Manual page 89

mLAN Audio/MIDI signal routing
Connecting mLAN16E-equipped mLAN devices allows for data transmission of up to eight audio input channels (four stereo
channels) and sixteen output channels, as well as four MIDI in/out ports. Try setting up your own mLAN system, referring to
the illustration below.
mLAN mLAN
IEEE1394
output input
cable
port 1 – 4 port 1 – 4
mLAN16E
1
MIDI
1 MIDI
The MIDI settings are the same as those for connecting the USB cable.
2 Audio output channels 1 - 14 (as1 - 14)
When selecting a Drum Voice, Performance or Multi, each Drum key or Part can be output from a specific mLAN audio
output (channels 1 - 14). For details about the output settings, refer to "Connecting to a Mixer" on page 63.
3 OUTPUT L and R jacks (L&R)
The signals from the OUTPUT L and R jacks (when playing the keyboard using a Normal Voice) are sent from mLAN output
channels 15 and 16.
4 Audio input Parts of the Performance and Multi
You can also use the audio from mLAN input channels 1 - 8 as the Audio Input Part(s). Refer to the "Using the microphone
and audio device sounds" on page 38 and the "Audio Input Part (AUDIO IN)" on page 118.
5 mLAN Monitor Switch
To monitor the sounds from mLAN output channels 1 - 14 and mLAN input channels 1 - 8 (through the OUTPUT L and R
jacks on the rear panel), set the following parameter set to "on."
[UTILITY] [F2] I/O [SF2] OUTPUT
Computer or mLAN device
mLAN
output
channels
port 1 – 4
2 3
Audio output OUTPUT L/R
channels 1 – 14 jack(L&R)
(as 1 – 14)
S90 ES
mLANMonitorSw (mLAN Monitor Switch) = on
mLAN
output mLAN input cannels 1 – 8
channels (Stereo 4 channels)
15 and 16
4
Audio input Parts
of Performance/
Multi
Using mLAN
Powered speakers
5
mLAN16E
Monitor
Switch
Owner's Manual
89