Yamaha S90 ES Owner's Manual page 83

Checking the Remote Control assignments
If you're unsure as to which software function has
been assigned to a particular panel control on the S90
ES, this convenient feature lets you quickly check it
from the display.
1
In the Remote Control mode, press the
[INFORMATION] button to call up the
information display, indicating the function of
the last pressed button.
2
Press the button for which you want to check
the assignment.
This display shown above appears when you press the [F]
([PERFORM]) button. In this way, you can check each button's control
assignment simply by pressing it.
3
Press the [INFORMATION] button again to
return to the Remote Control mode.
n
While the Information display is shown, the panel buttons
cannot be used to control the computer software.
Using the S90 ES with computer software
Remote Con trol Assignments
SF1 SF 2 SF 3
F1 F 2 F 3
SF1 SF2
F1 F2 F3
When controlling Multi Part Editor/SQ01 V2
Functions of 01X assigned to [F1] - [F6] and [SF1] - [SF5]
buttons
PAGE1
SEND GROUP
PAN/SEND
PAN DYNAMICS
FADER BANKS
TONE
FLIP
SOLO REC/RDY
MIXER/LAYER
ARP FX INST AUX/BUS
AUDIO MIDI
PAGE2
EQ LOW EQ HIGH-MID
EQ
SEL CH EQ LOW-MID
PAN/SEND
F5
F1 F2
TONE
TONE
ARP FX
ARP FX
CURSOR-L CURSOR-R
CURSOR-DWN CURSOR-UP
EQ
Button/Controller
names on 01X
In all modes:
[DISPLAY UP] Changes the parameter to be edited.
[DISPLAY DOWN]
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE] Changes the meter display mode.
[ON] (in the normal status) Turns each channel off or on (mutes/unmutes the signal).
[SHIFT] + [ON] of the Master Turns all the channels including the Master Channel off or on
Channel (in the normal (mutes/unmutes the signal).
status)
[SHIFT] + [ON] of each Turns all the channels with the exception of the Master
channel (in the normal status) Channel off or on (mutes/unmutes the signal).
[ON] (with the [SOLO] lamp Turns the Solo function of each channel on or off (applies to
turned on) the Channel Module/Software Synthesizer Module)
[SHIFT] + [ON] (with the Turns the Solo function of each channel on or off (applies to
[SOLO] lamp turned on) the Channel Module/Software Synthesizer Module)
[SOLO] Changes the function of the [ON] button to the Solo function.
[SHIFT]+[SOLO] Determines the Solo/Mute settings of the selected tracks in
the Track View window.
[SHIFT]+[REC RDY] Turns track recording on or off.
[AUDIO] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Channel Module software.
[INST] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Software Synthesizer Module.
[MIDI] Starts the MIDI Editor (such as the Multi Part Editor) or moves
it to the front of the computer screen.
SF 4 SF 5
INFORMATION
F 4 F 5 F 6
SF3 SF4 SF5
F4 F5 F6
NAME/VALUE DIAL RESET KN1-4/5-8
EFFECT BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
OTHER BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
EQ HIGH BANK-L BANK-R SHIFT
F6 F7 F8 KN1-4/5-8
F3 F4 SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
SCRUB DIAL RESET KN1-4/5-8
ZOOM BANK-L BANK-R SHIFT
Functions
Owner's Manual
83