Yamaha S90 ES Owner's Manual page 179

LCD Indication
USB connection terminated. Press
[ENTER].
USB device connecting.
USB device full.
USB device not ready.
USB device read/write error.
USB device unformatted.
USB device write protected.
USB power consumption exceeded.
USB transmission error.
Utility stored.
A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press the [ENTER] button.
Currently recognizing the USB storage device connected to the USB TO DEVICE terminal.
The USB storage device is full and no more data can be saved. Use a new USB storage device, or make space
by erasing unwanted data from the USB storage device.
A USB storage device is not properly inserted in or connected to the S90 ES.
An error occurred while reading or writing to/from a USB storage device.
The disk is not formatted, or the format is unusable by the S90 ES.
The USB storage device is write protected, or you have attempted to write to a read-only medium such as CD-
ROM.
The power consumption of the USB storage device connected to the USB TO DEVICE connector exceeds the
regulated value.
An error has occured when communicating with the USB storage device.
The settings in the Utility mode have been stored.
Description
Display Messages
179
Owner's Manual