Yamaha S90 ES Owner's Manual page 28

Naming
Basic naming operation
As shown below, you can set the name by repeating the two operations—moving the cursor to the desired location by using
the Cursor button and selecting a character by using the data dial, [INC/YES] button, and [DEC/NO] button.
Moving the cursor to the desired location on the name
Using the character list
If you find it difficult to select the desired characters with the above method, you may want to use the following method —
selecting the characters from a list.
Move the cursor to the desired location.
INFORMATION
28
Owner's Manual
DEC/NO INC/ YES
EXIT ENTER
EXECUTE
INFORMATION
Perform the operations below while holding the [INFORMATION] button.
DEC/NO INC/ YES
EXIT ENTER
EXECUTE
Selecting a character at the cursor location
DEC/NO INC / YES
When the cursor is located at the Name, this [LIST] icon
appears and you can call up the Character List display by
holding the [INFORMATION] button. Release the
[INFORMATION] button to return back to the original display.
Select a character for the cursor location on the name.
INFORMATION
DEC/NO INC / YES