Yamaha S90 ES Owner's Manual page 132

Voice Edit mode Normal Voice Edit
[SF2] DELAY
Delay (Delay Time)
FadeIn (Fade In Time)
Hold (Hold Time)
FadeOut
[SF3] PHASE
Phase
Offset EL1 - EL4 (Phase Offset
Element1 - Element4)
[SF4] BOX1 - 3
ElemSw (Element Switch)
Dest (Destination)
Depth
DptRatio EL1 - EL4 (Depth Offset
Element1 - Element4)
132
Owner's Manual
Common Edit
Determines the delay time before the LFO comes into effect. A higher value results in a longer delay time.
Settings: 0 ~ 127
Determines the amount of time for the LFO effect to fade in (after the Delay time has elapsed). A higher value
results in a slower fade-in.
Settings: 0 ~ 127
Low FadeIn value
Faster fade-in
FadeIn
Max
Delay
Key on
Determines the length of time during which the LFO is held at its maximum level. A higher value results in a
longer Hold time.
Settings: 0 ~ 127
Max
Determines the amount of time for the LFO effect to fade out (after the Delay time has elapsed). A higher value
results in a slower fade-out.
Settings: 0 ~ 127
Low FadeOut value
Faster fade-out
Hold FadeOut
Max
Determines the value for the particular step selected in the Step parameter below.
Settings: 0, 90, 120, 180, 240, 270
Determines the offset values of the Phase parameter (above) for the respective Elements.
Settings: +0, +90, +120, +180, +240, +270
From this display you can select the destination parameter for the LFO (which aspect of the sound the LFO
controls), the Elements to be affected by the LFO, and the LFO Depth. Three pages (boxes) provided for
setting the destination let you assign multiple destinations.
Determines whether or not each Element is to be affected by the LFO. The Element number (1- 4) is shown
when the LFO is enabled; a dash (-) indicates the LFO is disabled for that Element.
Determines the parameters which are to be controlled (modulated) by the LFO Wave.
Settings: amd, pmd, fmd, reso (Resonance), pan, ELFOSpd (Element LFO Speed)
Determines the LFO Wave Depth.
Settings: 0 ~ 127
Determines the offset values of the Depth parameter (above) for the respective Elements.
Settings: 0 ~ 127
High FadeIn value
Slower fade-in
Max
Time
Delay
Key on
Hold
Time
High FadeOut value
Slower fade-out
Hold
Max
Time
Time
Phase 0
90 180 270
120 240
FadeIn
Time
FadeOut
Time