Yamaha S90 ES Owner's Manual page 75

7
Store the settings as a User Multi.
The edited Multi can be stored in the Multi Store mode. For details, refer to page 76.
Editing a Multi by using the Control sliders
TIP
The four sliders at the top left of the instrument are not only for tweaking the sound while you perform — you can also
use them to edit a Multi, either in the Multi Play mode or the Multi Edit mode.
For details on the parameters edited by the sliders, refer to the descriptions in the Performance mode (page 55).
When the [PAN/SEND] indicator is turned on:
PAN [MULTI/SEQ PLAY] (Selecting Multi mode)
REVERB [MULTI/SEQ PLAY] (Selecting Multi mode)
CHORUS [MULTI/SEQ PLAY] (Selecting Multi mode)
TEMPO [MULTI/SEQ PLAY] (Selecting Multi mode)
When the [TONE] indicator is turned on:
CUTOFF [MULTI/SEQ PLAY] (Selecting Multi mode)
RESONANCE [MULTI/SEQ PLAY] (Selecting Multi mode)
ATTACK [MULTI/SEQ PLAY] (Selecting Multi mode)
RELEASE [MULTI/SEQ PLAY] (Selecting Multi mode)
n
The settings above are applied as offsets to the AEG and FEG settings in the Performance Edit mode.
When the [ARP FX] indicator is turned on:
SWING [MULTI/SEQ PLAY] (Selecting Multi mode)
GATE TIME [MULTI/SEQ PLAY] (Selecting Multi mode)
VELOCITY [MULTI/SEQ PLAY] (Selecting Multi mode)
UNIT MULTIPLY [MULTI/SEQ PLAY] (Selecting Multi mode)
When the [EQ] indicator is turned on:
LO [MULTI/SEQ PLAY] (Selecting Multi mode)
LO MID [MULTI/SEQ PLAY] (Selecting Multi mode)
HI MID
HI [MULTI/SEQ PLAY] (Selecting Multi mode)
When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
ASSIGN A Adjusts parameters assigned to these sliders in the [UTILITY]
ASSIGN B
ASSIGN 1 Depends on the settings of the Voice assigned to the selected Multi.
ASSIGN 2
n
In addition to above functions, Master Effect related parameters (set in the [MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT] [COMMON]
buttons simultaneously. The particular parameters are assigned to the four sliders can be set in the [UTILITY]
display.
When the [VOLUME] indicator is turned on:
PART Adjusts the level balance among the Parts.
[MULTI/SEQ PLAY] (Selecting Multi mode)
Compare function and Edit Recall (Multi mode)
These are the same as in the Voice mode and Performance mode. For details, refer to page 105.
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
Multi Selection
[F2] MEQ/MEF [SF2] MEFF display) can be assigned to these four sliders by pressing the [ARP FX] and [EQ]
Multi selection
[EDIT] Part Selection [F2] OUTPUT
[EDIT] Part Selection [F2] OUTPUT
[EDIT] Part Selection [F2] OUTPUT
[EDIT] [COMMOM] [F3] APP [SF1] TYPE
[EDIT] Part Selection [F4] TONE [SF2] FILTER
[EDIT] Part Selection [F4] TONE [SF2] FILTER
[EDIT] Part Selection [F4] TONE [SF4] AEG
[EDIT] Part Selection [F4] TONE [SF4] AEG
[EDIT] [COMMON] [F3] APP [SF3] PLAY FX
[EDIT] [COMMON] [F3] APP [SF3] PLAY FX
[EDIT] [COMMON] [F3] APP [SF3] PLAY FX
[EDIT] [COMMON] [F3] APP [SF3] PLAY FX
Part Selection [F3] EQ Low Gain
Part Selection [F3] EQ Mid Gain
–
Part Selection [F3] EQ High Gain
[F4] CTL ASN [SF2] ASSIGN display.
[EDIT] Part selection [F2] OUTPUT
Creating a Song with the Multi mode
[SF1] VOL/PAN Pan Page 159
[SF2] EF SEND RevSend Page 159
[SF2] EF SEND ChoSend Page 159
Tempo Page 158
Cutoff Page 159
Resonance Page 159
Attack Page 159
Release Page 159
Swing Page 158
Gate Time Rate Page 158
Velocity Rate Page 158
UnitMultiply Page 158
Page 159
Page 159
Page 159
Page 159
Page 165
Page 131
Multi selection
[F4] CTL ASN [SF5] MEF
Page 159
[SF1] VOL/PAN Volume
Owner's Manual
75