Multi Mode - Yamaha S90 ES Owner's Manual

Multi mode

Multi Play mode
[F1] PLAY
Track
OCT (Octave)
ASA (Assign A), ASB (Assign B)
AS1 (Assign 1), AS2 (Assign 2)
[SF1] ARP1 (Arpeggio 1) - [SF5]
ARP5 (Arpeggio 5)
[F2] VOL/PAN
PAN
VOLUME
[F3] VOICE
Determines the Voices for assigning to each Part. Select the Part then determine the Voice bank and Voice number via the same procedure as in the Voice
mode (page 24 ).
n
The Category Search function cannot be used to select the Voices of the Multi Part Plug-in Parts 17-32 (when the PLG 100-XG has been installed).
n
You can also change the VOICE NUM (Voice Number) or BANK MSB/LSB (Bank select MSB/LSB) directly using the Data dial.
[F4] EF SEND (Effect Send)
Determines the Send Level/Dry Level to the System Effects for each Part.
REV SEND (Reverb Send)
CHO SEND (Chorus Send)
DRY LVL (Dry Level)
[F5] ARP (Arpeggio)
You can select the Arpeggio display only from the [F1] Play display. The parameters are same as in the Performance Play mode.
n
Only Normal Voices can be edited.
[F5] VCE ED (Multi Voice Edit) (when a display other than [F1] PLAY is shown)
You can select the VCE ED display from any display other than the [F1] play display. Press the [F5] VCE ED button in the Multi mode to call up the Multi
Voice Edit mode (page 161). Press the [EXIT] button to return to the original display.
n
Only Normal Voices can be edited.
[F6] F/ J(when the [F1] PLAY display is shown)
Pressing the [F1] button plays back the MIDI song assigned to the last selected Chain Step number in the Sequence Play mode.
[F6] 17-32/PLG1-3/1-16 (when a display other than [F1] PLAY is shown)
You can switch among the displays for three types of Parts by pressing this button. Numbers 1-16 are Parts of the internal tone generator, 17-32 are Multipart
Plug-in Parts of the optionally installed PLG100-XG, and PLG 1-3 are Plug-in Parts of the optionally installed Single Part Plug-in Board.
n
Please note that the Multi-part Plug-in Part (17 - 32) settings apply not to one individual Multi but to all Multis.
[MULTI/SEQ PLAY] (select Multi mode)
Indicates the selected Part number.
The notes you play in Multi Mode will be transmitted on the same MIDI channel as the corresponding Track
number.
You can change the Track number by pressing the [TRACK SELECT] button (the indicator lights), then press
any of the Number [1] - [16] buttons.
n
Selecting one of the PLG Parts 1-3 displays Track 1-3. Selecting one of the Multi-part Plug-in Parts 17-32 displays Track
1-16, e.g. the PLG Part 1-3, displays Track 1-3. When selecting Multi-part Plug-in Part 17-32, displays Track 1-16.
Same as in the Performance Play mode (page 149).
Determines the stereo pan position for each part.
Settings: Settings: L63 - L01, C, R01 - R63
Determines the volume for each part, giving you detailed control over the level balance among the parts.
Settings: 0 - 127
Determines the Send Level for the Reverb/Chorus Effect of the selected Part, giving you detailed control over
the Reverb/Chorus balance among the parts.
Settings: 0 - 127
Determines the Dry Level (unprocessed level) of the selected Part, giving you detailed control over the balance
between the original, unprocessed sound of the Parts and the Reverb/Chorus sound.
Settings: 0 - 127
Multi Play mode
Multi selection
157
Owner's Manual