Rear Panel - Yamaha S90 ES Owner's Manual

Rear Panel

∞ [CATEGORY SEARCH] button
When this button is turned on, the lower row of Bank
buttons (labeled A.PIANO—REED/PIPE below the
buttons) and the Group buttons can be used to select
the Voice/Performance category.
§ [TRACK SELECT] button
[MUTE] button
The buttons enable you to switch the function of Number
[1] - [16] buttons. For details, see the "
[16] buttons."
Functions of the Number [1] - [16] buttons
Voice Play mode
Voice Edit mode
Performance Play mode
Performance Edit mode
Master Play mode
Master Edit mode
Multi Play mode
Multi Edit mode
Sequence Play mode
Multi Voice Edit mode
Rear Panel
1
2
1 POWER Switch
Use this to switch the synthesizer on or off.
2 AC INLET (AC Power Cord Socket)
Be sure the plug the AC power cord into this socket
before plugging the power cord into an AC outlet. Use
only the AC power cord supplied with the S90 ES.
3 Plug-in Board Slots 1 - 3 (Plug-in Boards
cover)
Installing an optional Plug-in Board to the S90 ES lets
you greatly expand the sonic palette of the instrument.
Up to three boards can be installed to the S90 ES's rear
panel.
18
Owner's Manual
Page 32
Page 104
Page 105
¢
Number [1] -
When [TRACK SELECT] button is on
Keyboard transmit channel setting
Element selection (1 - 4) and Element Mute setting (9 - 12)
Keyboard transmit channel setting
Performance part selection (1 - 4)
Keyboard transmit channel setting (when
memorizing the Voice mode or
Performance mode to the current Master)
or Multi Part selection (when memorizing
the Multi mode to the current Master)
Zone selection (1 - 4)
Part selection
Keyboard transmit channel setting
Element selection (1 - 4) and Element Mute setting (9 - 12)
3
GREEN
YELLOW
Plug-in SLOT
ORANGE
Page 8
Page 184
¶ SLOT 1 - 3 lamps
These three lamps show the installation status of the
Plug-in Boards. If the Plug-in Board has been correctly
installed, the corresponding SLOT lamp will light.
n
The Vocal Harmony Plug-in Board (PLG100-VH) can be installed
only to slot 1.
n
The Multi part Plug-in Board (PLG100-XG) can be installed only to
slot 3.
When [MUTE] button is on
—
Performance Part Mute setting (1 - 4)
Part Mute setting (when registering a
Performance or a Multi)
—
Part Mute setting
Part Mute setting
4 5 6 7 8
USB MIDI FOOT SWITCH FOOT CONTROLLER
BREATH 2
ASSIGNABLE SUSTAIN
TO DEVICE TO HOST THRU OUT IN FOOT PEDAL
ASSIGNABLE OUTPUT OUTPUT PHONES A/D INPUT
R L R L/MONO R L
9 ) ! @
4 USB connectors
This instrument is equipped with two types of USB
connectors on the rear panel—USB TO HOST and USB
TO DEVICE. The USB TO HOST connector is used to
connect this instrument to the computer via the USB
cable. The USB connection between the instrument and
the computer can only be used for transfer of MIDI data.
Unlike MIDI, USB can handle multiple ports via a single
cable. The USB connection can only be used for
transfer of MIDI data. No audio data can be transferred
via USB.
The USB TO DEVICE connector is used to connect this
instrument to a USB storage device (hard disk drive,
CD-ROM drive, MO drive, flash disk, etc.) via the USB
cable. This lets you save the data created on this
Page 99
When both [TRACK SELECT]
and [MUTE] buttons are off
Voice selection, according to Groups
A - H
—
Performance or Voice selection (if
cursor is located at Voice name),
according to Groups A - H
Master selection, according to Groups
A - H
—
Multi or Voice selection (if cursor is
located at Voice name), according to
Groups A - D
—
—
$
1
GAIN
#
Page 67