Yamaha S90 ES Owner's Manual page 85

Button/Controller
names on Logic Control
In all modes:
[SHIFT]+[UNDO] Executes the Redo operation.
[SAVE] Executes the Save operation.
[MARKER] Turns the Marker on or off.
[SHIFT]+[MARKER] Enters the Marker Option mode.
[RWD] Press to continuously rewind. Press repeatedly to rewind
more quickly. When the Marker is turned on, this operation
moves the song position to the previous Marker. When Nudge
is turned on, this operation moves the current object.
[FF] Press to continuously fast-forward. Press repeatedly to fast-
forward more quickly. When the Marker is turned on, this
operation moves the song position to the next Marker. When
Nudge is turned on, this operation moves the current object.
[STOP] Press to stop recording or playback. Pressing this when
playback is stopped goes to the top of the song.
[PLAY] Press to start playback from the current point.
[REC] Press this to start song recording. The [F] (Play) and [I]
(Rec) lamp are turned on during recording.
[ZOOM] Turns Zoom on and off.
[SCRUB] Turns Scrub on and off. When Scrub is on, the dial can be
used for Scrub playback. When Scrub is off, the dial is used
to move the song position.
PAN mode [PAN] (Multi Channel View)
[PAN] [PAN] (Track Parameter View of PAN/SURROUND)
Knobs 1 - 8 (turning) Edits the parameter.
Knobs 1 - 8 (pressing) Resets the edited parameter to the default value.
(Parameters other than Mode
selection)
SEND mode [SEND] (Multi Channel View)
[SEND] [SEND] (Track Parameter View)
Cursor [UP]/[DOWN] Changes the Slot number.
(Multi Channel View)
Cursor [LEFT] Changes the parameter to be edited.
Cursor [RIGHT]
(Multi Channel View)
Cursor [LEFT] Switches between SEND 1/2 and SEND 3/4...
Cursor [RIGHT]
(Track Parameter View)
Knobs 1 - 8 (turning/turning For editing parameters. When setting the Send destination,
pressing) turn the knob to select it (indication flashes), then press the
knob to actually enter the selected setting.
Knobs 1 - 8 (pressing) Reset the parameter value to the default.
(when the edited parameter
is Send Level)
Knobs 1 - 8 (pressing) Changes the setup.
(when the edited parameter
is PRE/POST or Mute)
PLUG-IN mode [PLUG-IN] (Multi Channel View)
[PLUG-IN] [PLUG-IN] (Track Parameter View)
Cursor [UP]/[DOWN] Changes the Slot number.
(Multi Channel View)
Knobs 1 - 8 (tweaking Turn the knob to select the desired Plug-in for insertion
pressing) (indication flashes), then press the knob to actually enter the
selected setting.
Knobs 1 - 8 (pressing) Calls up the parameter page and opens the Editor window on
(Knob to which the Plug-in is Logic.
assigned)
Knobs 1 - 8 (tweaking) For editing parameters.
(Parameter page)
Knobs 1 - 8 (pressing) Reset the parameter value to the default. (Some parameters
(Parameter page) cannot be reset.)
Cursor [LEFT] Changes the page.
Cursor [RIGHT]
(Parameter page)
[PLUG-IN] Return to the PLUG-IN mode.
INSTRUMENT mode [INSTRUMENT] (Multi Channel View)
[INSTRUMENT] [INSTRUMENT] (Track Parameter View)
Knobs 1 - 8 (tweaking Turn the knob to select the desired instrument for insertion
pressing) (indication flashes), then press the knob to actually enter the
selected setting.
Knobs 1 - 8 (pressing) Calls up the parameter page and opens the Editor window on
(a Knob to which the Logic.
Instrument is assigned)
Knobs 1 - 8 (tweaking) Edits the parameter.
(Parameter page)
Knobs 1 - 8 (pressing) Resets the edited parameter value to the default. (Please note
(Parameter page) that some parameters cannot be reset.)
Cursor [LEFT] Changes the page.
Cursor [RIGHT]
(Parameter page)
[INSTRUMENT] Return to the INSTRUMENT mode.
When turning the [VOLUME] button off, the Control sliders on the S90 ES are assigned to perform
the same functions as the Knobs on the DAW controller.
Press the [DRUM KIT] button to indicate the Track/Slot number in the brackets [ ] at the top of
the LCD.
The [OPTION], [CONTROL], and [ALT] buttons on the Logic Control corresponds to the [EDIT],
[JOB], and [STORE] buttons at left below the LCD respectively.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Logic Control.
Functions
Using the S90 ES with computer software
When controlling Cubase SX 3:
Functions of Mackie Control assigned to [F1] - [F6] and [SF1] -
[SF5] buttons
ASSIGNMENT
PAGE UP PLUG-INS
PAN/SEND
PAGE DWN PAN
FADER BANKS
TONE
FLIP EDIT
CHANNEL-L CHANNEL-R
ARP FX
MASTER SAVE
SENDS INSTRUMENTS
FaderGroup
5
EQ
1 2
PAN/SEND
F5
F1 F2
TONE
TONE
PROJECT MIXER
LEFT RIGHT
ARP FX
ARP FX
CURSOR-L CURSOR-R
CURSOR-DWN CURSOR-UP
EQ
Button/Controller names on
Mackie Control
In all modes:
[PAGE UP] Calls up the next/previous page.
[PAGE DOWN]
[SHIFT]+[PAGE UP] Calls up the first page.
[SHIFT]+[PAGE DOWN] Calls up the last page.
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SEL] Selects a channel.
[MUTE] Mutes or unmutes each channel.
[SHIFT]+[SOLO DEFEAT] Unmutes all channels.
[SOLO] Sets Solo for each channel to on or off.
[SOLO DEFEAT] Sets Solo for all channels to off.
[REC RDY] Sets the REC RDY of each channel to on or off.
[BANK </>] Scrolls through the track indication every eight channels.
[CHANNEL </>] Scrolls through the track indication channel-by-channel.
[FLIP] Switches the functions of the Channel Knobs and Faders.
[CYCLE] Turns Loop on or off.
[F1] - [F8] [F1] - [F8] as defined in Cubase SX.
[PROJECT] Brings the Track View window to the front of the computer
screen.
[MIXER] Opens the Mixer window.
[SHIFT]+[EDIT] Closes the current window.
[1] - [8] Corresponds to 1 - 8 of the Channel View on the Mixer
Window.
[UNDO] Executes the Undo operation.
[REDO] Executes the Redo operation.
[SAVE] Executes the Save operation.
[ADD] Enters a Marker at the current song position.
[RWD] Hold to continuously rewind.
[SHIFT]+[RWD] Moves the song position to the top of the song.
[PREV] Moves the song position to the previous Marker.
[FF] Hold to continuously fast-forward.
[SHIFT]+[FF] Moves the song position to the end of the song.
[NEXT] Moves the song position to the next Marker. (This may not
work in certain conditions.)
[STOP] Press to stop recording or playback. Pressing this when
playback is stopped goes to the song location at which the
song playback started at last time.
[PLAY] Press to start playback from the current point.
[REC] Press this to start song recording. The [F] (Play) and [I]
(Rec) lamp are turned on during recording.
PAN mode [PAN] (MULTI CHANNEL only)
Knobs 1 - 8 For editing parameters.
EQ mode [EQ] (SELECTED CHANNEL only)
Knobs 1 - 8 For editing parameters.
SEND mode [DYN] (SELECTED CHANNEL only)
Knobs 1 - 8 For editing parameters.
DYN DIAL RESET KN1-4/5-8
EQ BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
REVERT DIAL RESET KN1-4/5-8
UNDO REDO SHIFT
6 7 8 KN1-4/5-8
3 4 SHIFT
F6 F7 F8 KN1-4/5-8
F3 F4 SHIFT
SOLO DEFAT DIAL RESET KN1-4/5-8
CYCLE PUNCH SHIFT
ADD DIAL RESET KN1-4/5-8
PREV NEXT EDIT SHIFT
Functions
Owner's Manual
85