Yamaha S90 ES Owner's Manual page 97

Press the cursor [ ][ ] buttons to move the
8
cursor to the desired Chain Step.
Press the [F6]Fbutton to start playback of
9
the song.
You can also play back the song by simultaneously holding
down the [MULTI/SEQ PLAY] button and pressing the
[PERFORM] button.
When the Chain Step playback has finished, the song at
the next Chain Step number will automatically be started.
Moving the song position/changing the tempo
You can move the Song position or change the playback tempo for the Song at the currently selected Chain Step. When the
Song is played back, the tempo setting made here automatically takes precedence over the original tempo setting of the
Song.
Selecting the MIDI transmit channel for playing back the keyboard
Press the [TRACK SELECT] button so that its indicator lights and press one of the Number [1] - [16] buttons to select the
desired track for playing the keyboard.
The internal Voices of Multi Parts 1-16 are set by default to the respective MIDI receive channels 1-16. As a result, selecting
a Part number will normally select the same numbered MIDI channel for use as the MIDI transmit channel for your keyboard
performance. Keep in mind however, if any of the settings have been changed for the Multi, you will need to check the
channel assignments and select the appropriate channel for the Part you wish to play.
Change the tempo
F4
1 2 3 4
ELEMENT/PERF. PART/ZONE
9 10 11 12
Playing back MIDI files (Sequence Play mode)
Press the [F6]Jbutton to stop playback of
10
the song.
You can also stop playback by simultaneously holding
down the [MULTI/SEQ PLAY] button and pressing the
[VOICE] button.
Also, if an "end" or "stop" Chain Step is reached, playback
will stop.
Move through the measures
F5
The measure be specified when releasing the [F5] button.
TRACK
5 6 7 8
SELECT
13 14 16
15 MUTE
SOLO
97
Owner's Manual